I was surprised by that, too. When I went looking for a way to decode them with RTL-SDR, I assumed it wouldn’t be parsing the audio but a narrowband data stream. TIL also.

Edit: It does kind of make sense with it being AFSK encoded in-band, though, or maybe I’m just so used to it being that way. I always thought the screeches were there to demand attention (and also be something that headend equipment can pick up and respond to). So it’s interesting they’re doing double duty as both an unmistakable audio cue to pay attention as well as containing the actual alert data.

Plus there are NOAA stations all over the country rather than centralized like the time signal transmitters. It was probably cheaper to do it in band at that scale.

That’s what I’ve done for years. Makes managing things much easier, and I run multiple APs (all with the same SSID/PSK) and you can just roam to the best one. One upstairs, one downstairs, one in the weird dead zone in my office, and one on the back patio (it’s not hardwired and uses the mesh connection for uplink).

These are all old Aruba APs running OpenWRT but that’s the plan for this Cudy Model. I may pick up a few more and just replace all of my trusty but very old Arubas.

I bought this one last month when it was on sale for $39: https://www.amazon.com/dp/B0BRK3CYY3

Haven’t deployed it yet, but it’s fully supported by OpenWRT. I would only be using it as an access point, though. My router is a USFF Optiplex with an extra NIC and runs OpenWRT.

Audio transcribing should be the little “waveform” icon at the right of the text input:

Image generation, I’m not sure as that’s not a use-case I have and don’t think the small-ish models I run are even capable of that.

I’m not sure how audio transcribing works in OpenWebUI (I think it has built-in models for that?) but image generation is a “capability” that needs to be both part of the model and enabled in the models settings (Admin => Settings => Models)

I’ll come hang out, but I will not be helping you move any furniture.

I used to buy their stuff and use tuya-convert to flash Tasmota onto them. But they kept updating the firmware to lock that out, and I ended up returning a batch of 15 smart plugs because none of them would flash. They were too much of a PITA to try to crack open and flash the ESP8266 manually so I returned the whole batch as defective, left a scathing review, and blackballed the whole brand.

Loops finally seems usable now. I tried the beta a while back and it was kinda “Meh” but it’s improved significantly since. And you can browse on the website now, too. I’m not into short form videos, but credit where it’s due.

Well, I do like short form videos, but I hate panning for the gems and just let my friends send me the ones that rise to top.

It’s so common for “anti-censorship” to be code for “Nazi-friendly” that I’m immediately suspicious of any platform that uses that as a selling point.

I’m similarly suspicious, but it’s not just code for “nazi-friendly” but also crackpots, maladaptives, etc. Rational people who read and say “anti-censorship” in this context know it means that it’s not beholden to corporate or government interests. But everyone else seems to want to interpret that as “I can say whatever I want! How dare you mod anything I say?! Freeze-peach, y’all!”

I wish they’d pick a different term for these non-corporate alternatives, but I don’t have a better suggestion to offer right now.

The base system is stable. The only instability I really had with mine was the fingerprint sensor resetting every week. It would just stop registering until you turn fingerprint detection off, reboot, and re-enroll all of your prints. The second update they pushed seems to have fixed that.

Their default launcher could use some work. I replaced Minimal Launcher with a similar one that works identically. The problem with Minimal Launcher is it is hardcoded to certain apps. I’ve de-googled mine so I don’t use Google clock or calendar. Clicking the time or date in Minimal Launcher will only take you to Google Clock or Calendar (respectively) rather than asking what app to open or trying to detect the default app for that. I submitted a bug for that a couple months ago but so far no fix.

They also seem to only update their software (launcher, quick settings, keyboard config, etc) through system updates rather than via apps. You also can’t disable any of them either.

I also haven’t heard anything more about them supporting non-Googled or third party Android builds.

The hardware is the same AFAIK but they’ve put out two three software updates since I’ve had it. One added some extra features to the eink control utility and the second fixed some really annoying bugs with the fingerprint sensor. Both also included the system security updates as well.

There was a 3rd one a few weeks ago, but I think it was just a security bump. It wasn’t announced and just showed up. There may have been some tweak to the QWERTY keyboard utility because now the annoying bar that only indicated the ALT/Shift status at the bottom is no longer there and was happy to no longer see.

I was prepared for 6, but I’m good with 8. Thanks!

Same. It would definitely be my daily driver. I’m using the Minimal Phone now but have often found that I would rather have this same form factor with a regular screen, and the Communicator seems to basically be that. I am still deciding if I want to pre-order but I’ve set a reminder to do or don’t before the window closes.

According to the support ticket I put in a week or so ago, the bootloader will be unlockable which is great news.

The only thing the specs don’t mention is how much RAM it will have.

I mean, first layer adhesion is a problem common to more than just a specific printer and there are all kinds of tips and tricks to deal with it. The only one I tried (covering the bed in painter’s tape) didn’t pan out, and a friend was talking up the glass bed he just installed.

So instead of trying more tips and tricks like taking a glue stick to the bed surface, I went with the glass bed. I was expecting it to be like a $60 part but it was only like $15 so that worked out really well.

My Ender 3 V3 SE (I think I got all the initials in there?) has been pretty painless. The only thing I changed on it was replacing the stock magnetic bed with the glass one. I was having constant adhesion problems with the base layer and the glass bed fixed that immediately.

The other thing that (seemed to) help was switching from whatever slicer I originally used (forget which) to OrcaSlicer and just using its generic defaults for the filament and printer options. When I first started, I took the specs from the filament rolls and made profiles for each brand, but that just made my prints worse. Orca’s defaults “just work” for me and less effort on my part. Win-win lol.

I guess what you’re calling “toxicity” is something I’ve dealt with more-or-less successfully by just blocking and switching instances. In fact, those are so far out of my mind I forgot to include them in my “see things through the eyes of a new user” experiment (I only unblocked communities/instances for that). But yeah, considering how many people, communities, and lemmy.ml + dbzer0 I’ve had to block and how much work that was and continues to be, I guess that does speak to a bigger problem that could be solved by better modding. I would hope some of the more egregious bad behavior only gets a pass because this place is so relatively small, but I fear that’s just me being naive.

Topic areas would be amazing and a much better onboarding experience than dumping you into the community list or /all. Topics you want to see, topics you never want to see, and maybe have it build a default subscription and/or default block list for those. And maybe a better “duplicate” detection system where there’s like 5 posts for the same non-story about a rich person farting and the Fediverse breaking out the torches and pitchforks over it. At least then you could slow-boil you way to the angry stuff that currently dominates the feed and give you a chance to turn those off rather than turning you away from the platform.

I would love to try Piefed because I keep hearing that it’s basically adding all the features Lemmy has needed forever, but TBH, my instance would have to migrate to Piefed or stand up a copy. I was on .world before I moved to startrek.website and the “feel” is just so much better here (general negativity of the overall Threadiverse notwithstanding). As you said, that’s primarily due to modding and giving the perma boot to the ones who don’t play well with others (as large as my block list is here, it’s significantly smaller than the blocklist I had on .world before I just gave up it as an instance).

Even Linux took decades to arrive at where it is at today

True. I’ll admit I’m impatient (my major remaining rough edge therapy has not yet conquered lol) but every time I see a brand new account coming in with their first post bitching about getting banned from Reddit it’s just a reminder that we’re not attracting the best and brightest here but rather the ones who have nowhere else to go. And they bring that behavior here and it just seems like it takes us further away from becoming a real alternative people actually want to go to. I’m going off on a tangent, I know, so I’ll stop here.

Lol, I guess the reply still shows up in the inbox. Even if I had noticed it was marked deleted, I wasn’t going to pass up the opportunity to recommend something Star Trek related 😆

Yeah, to pretty much all that.

My experience here is generally pretty pleasant, but it took a LOT of work blocking untold numbers of communities, users, and instances to get here. Other on-boarding difficulties aside (for less savvy users), it’s just a big ask to expect them to do all that work just to not be hit in the face with all the negativity and raging and dig deep for everything else. Reddit may have numerous flaws, but at least I can go to the front page and it doesn’t feel like I’m walking into the midst of an angry mob.

My two cents is basically this: We did this to ourselves here. Elsewhere, we might have blamed the algorithms for pushing rage-bait front and center, but here it’s 100% organic (unless there’s just a massive bot problem which I don’t have reason to suspect).

I started with “A Stitch in Time” but that was only because I just wanted to read it.

Here’s the resource someone shared with me for reading order: https://www.thetrekcollective.com/p/trek-lit-reading-order.html?m=1

I read several before seeing that but thankfully all the ones I read were marked as good starting points.

+1 for reading more. I took a break a few weeks ago, but I’ve been deep into the Star Trek books since last summer.