Sounds like a thermal runaway where a temperature changed too quickly and the code interpreted that as a fire or risk of fire and shut down. A lot of times that can be helped with a silicone sock and a PID tuning. Another thing is the ceramic heater core is going bad and it can’t keep a stable temp above a point. Heater cores are cheap and easy to change. The heater core is considered a consumable part and usually comes in multiple packs.

Might wanna switch that F to a C.

So they finally got all that sweet user location data they needed to create whatever their ultimate goal was. Probably some kind of population density map for military purposes.

PETG is picky about layer heights and speed.

Thick and slow for PETG. I usually double my layer height vs what I would print in PLA. With my .6 nozzle I print with .3 layer and cut my speed down to 50% for the first layer. Since you said it happens mid print you might be printing too fast for the first few layers and it is getting too high because the layer is not cooling enough and it starts curling. You can also try reducing flow if your nozzle is worn and it’s allowing more plastic than the sclicer expects which will cause too high layers and scraping.

Oh and it sounds like it’s too hot too. 80° bed in a enclosure could cause the chamber to get too hot and not allow the layers to cool fast enough and so you will see curling while printing. Lower the bed to 40-50 and monitor chamber temps. Maybe open the doors a crack. You only need an enclosure for PETG if the room is drafty.

That’s 2 heading cards, one is set as the title and the other as subtitle. The title has the navigation option turned on to navigate to that room. And the subtitle is just filled with entities. I then use a entities card set with just the divider. It’s a messy way to do it but it was the best I could figure.

Just to give an idea what I use it for based on my Home Dashboard

Office is under remodel which is why the sensors are offline.

Been using it for awhile now. Do we have a way to use our phones as the play yet? I want to be able to listen on my phone with headphones or even in my car with Android Auto. I would love to be able to delete my Spotify app. I still use the service because the radio feature is still much better than MA. But once I can do everything that Spotify can be I can cancel my Spotify account.

Won’t work, as you thrust your ass will pull away. Only way I could think of is having the portals on platforms that would move with you.

That is a bed leveling issue. It’s too far away where there are gaps and too close where there is rippling. Run a bed leveling procedure and if the model allows for manual leveling you should go through that and then do another mesh leveling.

Also clean your build plate with soap and water and avoid touching it with bare hands.

So online farmers/flea market?

Why not just use a connector that is designed for this much and is already cheap and easily available.

More drives mean more heat and more power usage. Better to have two large with parity enabled. The chances of both failing is very rare. Should be using an online backup service like backblaze or having a plan to take a copy off-site.

Because of googles enshitification I have stopped using voice to control my home entirely. I invested in many scene remotes and built extensive automations. I’ve come to not miss voice control at all. But here’s to you that want this either for assistive needs or just because. I just need to get a few more local TTS speakers for alerts.

My doctor’s app does this and it annoys the fuck out of me. I get test results and I want to share them with my wife and it’s like nope.

Uhh PSP was already a thing.

My tree has 500 ws2812 pixels that I printed c9 covers for. It’s running wled and added to HA so it turns off and on with entering the room or watching TV. Added bonus is the addition of a mic so it dances to the music.

How about some crypto

Neverending story, except for Artax.

If we swap a human brain are they still the same person? If you say no a brain makes the person then if you swap a computer’s brain it is no longer the same computer. Even windows agrees because if you swap a cpu you must reauthorize your install.

Maybe but it looks like the highest point of the pumpkin flesh is higher than the lowest point of the stem so it wouldn’t look as good. This way is much less waste and faster because you can print all the stems at once.