• 0 Posts
  • 24 Comments
Joined 1 year ago
cake
Cake day: June 17th, 2023

help-circle
  • When I bought my 3 it was $2200 including the harness for my car. Now the newer 3X is $1450 including harness (economies of scale!). I’ve been running it for 2 and a half years now and have 80,000 miles logged in my unit.

    I’m using it in a 2016 Civic Touring which was their original dev car model so it’s well documented and had a modification available to get necessary torque in tighter highway turns and be able to slow to and resume from stop. Other cars may work better or worse in terms of torque and ability to control speed. They have pretty extensive vehicle listings on their site and GitHub detailing the capabilities they are available depending on the car.

    https://comma.ai/shop/comma-3x

    I don’t work for Comma or anything, just am a fan of the tech and how it has allowed the controls in my car to get better over time rather than being stuck with what they shipped in 2016. My wife’s 2021 CR-V has better stock driver assist than my 2016 Civic, but my Comma’s assist experience today is far better than either stock system.


  • A Comma 3 driver assist system for my car. I drive a lot for work, and it’s an absolute game changer for driving distance as an enhancement to the stock LKAS and ACC systems. Highway miles are dramatically less strain and effort, and it makes me more able to watch the flow of traffic and keep an eye out for hazards. Their tagline is that they’re “making driving chill” and it’s definitely the case as long as you have a fully compatible vehicle.


  • Lots of good advice here. I’ve got a bunch of older WD Reds still in service (from before the SMR BS). I’ve also had good luck shucking drives from external enclosures as well as decommissioned enterprise drives. If you go that route, depending on your enclosure or power supply in these scenarios you may run into issues with a live 3.3V SATA power pin causing drives to reboot. I’ve never had this issue on mine but it can be fixed with a little kapton tape or a modified SATA adapter. It’s definitely cheaper to shuck or get used enterprise for capacity! I’m running at least a dozen shucked drives right now and they’ve been great for my needs.

    Also, if you start reaching the point of going beyond the ports available on your motherboard, do yourself a favor and get a quality HBA card flashed in IT mode to connect your drives. The cheapo 4 port cards I originally tried would have random dropouts in Unraid from time to time. Once I got a good HBA it’s been smooth sailing. It needs to be in IT mode to prevent hardware raid from kicking in so that Unraid can see the individual identifiers of the disks. You can flash it yourself or use an eBay seller like ThArtOfServer who will preflash them to IT mode.

    Finally, be aware that expanding your array is a slippery slope. You start with 3 or 4 drives and next thing you know you have a rack and 15+ drive array.





  • The better upload requires using their modem/router, or one of the specific users owned ones that are approved by them to work with the mid-split tech. While my old modem could technically do it, it wasn’t “approved” for the speed. I was limited on upload to 35 but could usually hit 45 from over provisioning. I had to buy a new modem but now I get 1400/200. They just flipped the switch on being able to use consumer owned hardware at all with the mid-splits this fall.




  • I’ve been using one for several years now with one of the documented switches that add multiple ports. https://docs.pikvm.org/ezcoo/#connections First in a DIY and then with the v3 hat Kickstarter I guess total I’m at $270 between the Kickstarter HAT and ezcoo switch plus the cost of a Pi (which I already had) I can reach 4 machines over my Tailnet and jump between them reliably. I can also control power on my primary server. (others are on a network managed PDU and can be forcibly reset that way if needed)

    I had an old console from a job but it was so old that it required an ancient version of Java to access through the web interface. I’m sure there may be better options, but for my homelab setup the pikvm has worked well at a price that fit in my budget.







  • Prosthetics. Costs are always blown way out of proportion because the media looks at just the device and ignores the professional expertise and custom fabrication work that goes into the devices. They also all like to hype that arms are “mind controlled” when they’re all using different variations of the same myoelectric technology that’s been around for years. There have certainly been dramatic advances as a result of better battery technology and 3D printing improvements to rapid prototyping, but what the media presents is typically very out of touch with reality. It’s even worse when you go from news media to movies and TV shows that set completely unrealistic expectations for patients.





  • Not necessarily. I’m on a daily medication that has a generic but is available in both extended release and immediate release forms. The extended release provides a more consistent dosage and has historically prevented me from getting sick. The immediate release causes inconsistent spikes and I have a history of getting sick on it. Insurance refused to pay for the extended release type for about 2 years before it made it onto their “formulary.” In the meantime I was using GoodRx and paying $100/mo instead of my paid health insurance pharmacy plan to make sure I wouldn’t get sick. The person I spoke to at the pharmacy management wing of the insurance company literally told me “you can get an app on your phone which will tell you when to take the immediate release medication.”