Probably not.
However, not all USB to SATA adapters support SMART, so even if there is a bad sector that gets remapped by the HDD on-the-fly (and thus does not show up in the software scan), you may not find out easily
Hey 👋 I’m Lemann: mark II
I like tech, bicycles, and nature.
Otherwise known as; @lemann@lemmy.one and @lemann@lemmy.world
Probably not.
However, not all USB to SATA adapters support SMART, so even if there is a bad sector that gets remapped by the HDD on-the-fly (and thus does not show up in the software scan), you may not find out easily
Chromium… I’m so getting downvoted with this one.
Why? Anyone is free to use whatever browser floats their boat 🤷♂️
Firefox itself is quite sluggish and slow to open on that piece of hardware
Do you get the same issues on an older version of Firefox for that device? If yes, proceed with caution - your device’s internal EMMC might be nearing EOL considering how old Android 6 is
But the problem is they all do not support modern arm64 apps that most Android phones use nowadays. Instead they need this other type called armeabi-v7a
They probably just stopped building for Android 6 devices. The SDK and various third party libraries continue to add new features all the time, and unlike Firefox, the majority of devs do not have the time or resources to manually code-in the missing bits to retain compatibility with old versions of Android. As a side effect, these custom implementations may have bugs or issues that go unnoticed due to the shrinking install base.
One of the more noticeable bits that changed is the Share API, which is why Firefox’s one looks so different vs every other app. There are other things like enhanced battery optimization and the storage API, which have changed a lot since Android 6.
IMO your best option is an older version of FF, or install Lineage (etc) on that device and use another browser
Edit: change “age of device” to “shrinking install base”
Really nice to see improcements being made to local voice control.
I personally haven’t opted for it yet due to the computing reqirements - instead been looking into dedicated offline voice recognition modules, since they use much less power. Downside is that they recognise a mostly predefined set of commands, and are just looking for patterns in speech instead of actually performing voice recognition
Would be interesting to compare the two voice control approaches side by side at some point
IIRC Beehaw doesn’t federate downvotes. The OP has been pretty heavily downvoted for no valid reason
I’ve tried both on my low powered HTPC and came to the same conclusion - especially noticeable where video acceleration is concerned
Something about that channel feels “off”, don’t know what it is. Maybe all the rants and abundance of negative opinions?? Perhaps it’s the culture difference in how he communicates on camera?
The only positive videos I’ve seen are him moving to macOS, the dell laptop one, and i guess the keyboard one, the other ones seem to be mostly opinion pieces & rants. There are other channels that do a better, more balanced job of this I think
Explains why I was having issues with this in Gnome on my HTPC…
Ended up making a remote button shortcut to maximise and restore apps
I used to have only 4GB in my old Linux HTPC, didn’t take much for it to choke when using the browser. Upgraded to 16GB and no issues since
Some websites I know actually do this - usually end up getting around it by using selectors to identify elements nested in a particular order, rather than using class names. Nowhere near as reliable though
Got to really wonder what’s going on at Mozilla. Between the previous CEO milking it for cash, the purchase of an ad company, and now this?
Precisely this
Mine can also dehydrate food super quickly with a variable fan speed, which my traditional oven can’t do without burning through a ton of unnecessary energy
That thread could do with one of these: https://en.m.wikipedia.org/wiki/Fire_retardant
Hehehe
Micromobility is pretty active if you’re interested in product coverage and news. As for more organic content, it’s pretty infrequent in any of the existing bicycle communities ☹️
I’m looking into printing with ASA eventually - have you tried skirts on an ASA print? (Not sure what other slicers call it - it’s a wall that is printed around the print to shield drafts)
I don’t have an enclosure on my delta so was considering that as an alternative.
I used to use MQTT, static_status and Healthchecks.io, and have that data passed through to Home Assistant, but it started to get pretty cumbersome as the amount of machines I had grew.
I now use just Zabbix and HealthchecksIO. I did need to spend some time writing new templates for some additional data I wanted to collect (like SMART data for SSDs that provide health metrics in non-standard attributes, and HealthchecksIO so I could see the status of various checks on my zabbix dashboard)
Zabbix also has some additional features I found appealing, like proxies that can continue recording data when the main server is down, and built in encryption. Some checks like open ports/icmp responses etc can be checked using either the local agent, the remote server, or both, which helps quickly diagnose things like firewall config issues.
I did look at some other solutions, but I wanted something integrated to hit the ground running. Mobile apps are very limited, and there is no official one to my knowledge. I use Moobix which I don’t believe is FOSS - but I could be wrong there
Try each solution out and see what works best for you!
Welcome!
Since you’re on the lemmy.world instance, there’s a bunch of additional interfaces available to you:
If you’re on mobile, there’s a ton of apps to choose from at https://join-lemmy.org/apps , or if PWAs are more your thing, your instance has the Voyager/Mlmym interface setup at https://m.lemmy.world/
Finding communities used to be difficult, but it should be straightforward now just from the search, seeing as it is the largest instance.
Hope you enjoy your stay 😁
Typically free of charge for the country’s public services to get a domain if the registrar is based within the country.
There are other countries that don’t actually own their TLDs like .io, .tk, .ga, .cf etc. Mali recently forcibly reposessed their .ml domain from overseas ownership IIRC
I had a similar stringing issue with PETG on my flsun Q5, where PLA was printing flawless without any strings whatsoever. Since your SR isn’t a bowden, that mostly rules out retraction distance IMO.
For me I narrowed it down to Z-hop: as the printer was lifting the nozzle slightly to move to another part of the print, molten filament oozed out - sticking to the print, and getting stringed across by the nozzle. I only noticed after recording the print (use at least 60fps to avoid the frame blurring you’ll get at 30> and watching what exactly was happening prior to the stringing. It took about 4 hours to get to that point 😭
If orcaslicer is based on Prusaslicer, wipe on retract with the initial distance set to 100% may not trigger a wipe. Try 70% or 80% instead. There’s another setting somewhere to force retraction when changing layers: enabling this will forcibly honor your wipe retraction preference when changing print layer.
I think you may still get stringing at the really spiky parts of the test print, given there’s no space for a wipe, and that volcano is going to hold way more molten filament than a V6 or similar
Hopefully someone with more experience can add their 2¢, it was pretty difficult to research info online when I had PETG stringing - everything just says “tune your retraction” 😤
Edit: I mixed up the SR with the v400! In that case, Another thing to check is your bowden tube pneumatic couplers - unload the filament and tug lightly on each to see if they’re fitting securely. If they’re loose, your extruder can end up moving the bowden tube itself back and forwards, which affects your retraction
shudders thinking about SAO
ASMedia is the only controller IC manufacturer that can be trusted for these IME. They also have the best Linux support compared to the other options and support pass-through commands. These are commonly found in USB DAS enclosures, and a very small fraction of single disk SATA enclosures
Innostor controllers max out at SATA 2 and lock up when you issue pass-through commands (e.g. to read SMART data). These also return an incorrect serial number. These are commonly found in ultra cheap desktop hard drive docks, and 40pin IDE/44pin IDE/SATA to USB converters
JMicron controllers (not affiliated with the reputable Micron) should be avoided unless you know what you are doing… UASP is flaky, and there are hacky kernel boot time parameters required to get these working on Raspberry Pi boards. Unfortunately these are the most popular ones on the market due to very low cost