Wording on second one is word, should be “bottom 15” really.
Wording on second one is word, should be “bottom 15” really.
Dunno why ppl are down voting you, this is 100% the way.
Architecture as code is amazing, being able to completely wipe your server, re-install fresh, and turn it on and it goes right back to how it was is awesome.
GitOps version controlled architecture is easy to maintain, easy to rollback, and easy to modify.
I use k8s for my entire homelab, it has some initial learning curve but once you “get it” and have working configs on github, it becomes so trivial to add more stuff to it, scale it up, etc.
All the electronics inside are very much capable of combustion.
Your power supply inside the printer body for example can very much fail and burst into flames.
And tbh it’s not that uncommon for that to happen with 3d printers. They’re often made with very cheap parts and prone to cheap work on the inside bits.
Add on how much of a high wattage load they meed to handle for extended periods of time and yeah, sometimes the inner wiring bursts into flames and the whole thing goes up.
I always recommend keeping a cheap lil smoke alarm directly overhead any 3d printer, seriously. Those fuckers can very much spontaneously burst into flames lol
None of this stops the risk of fire.
Once a fire starts, the printer turning off won’t magically stop the fire from continuing to grow.
Printers can fail in all manner of ways.
Also, you should have a venting solution of printing ASA.
It’s pretty cheap to get a proper fire resistant heat cover for a printer.
Just get an emergency “space blanket”, they’re often only a couple bucks and quite good, but very fire resistant.
The fact that they prioritized Helluva Boss (which does follow that type of storyline), on their own YouTube (which they have control over), whereas Hazbin was put onto Amazon Prime with only 8 episodes honestly is what I think caused it.
My gut instinct was to assume they had to agree to certain conditions to get onto Amazon Prime and the money from that is what got us Helluva Boss (which if you haven’t watched that, it’s so fuckin good)
It’s a musical, the songs are catchy.
However I disliked how fast paced the writing was, and how even though it’s called “Hazbin Hotel” and the pilot framed it as a sort of slice of life “bunch weirdos” hanging out and getting redemption, instead that weirdly became the B plot?
Somehow they took the whole story and shifted it over to the B plot and pulled this other big high stakes thing out as the A plot.
That’s not really what I was wanting to watch, and it feels a bit like they hit swapped out the story on me, so I kinda got a bit turned off by that.
I don’t give a shit about some high stakes angels vs demons war end game shit.
I wanted to see interpersonal relationships of weirdos learning to co-exist.
Tl;dr: I was expecting something closer to The Good Place, but instead that got side lined by some huge MCU style plot no one asked for.
… no? I was asking a serious question.
Who tabled this bill, and who is supporting it?
Sometimes its a physical issue in your setup.
Double check your cable, double check the carriage, and double check the rails, look for potential obstructions.
I had one print that kept failing in the exact same place each time, couldn’t figure it out, then I watched it live and the dang ribbon itself was physically catching on a specific part of the geometry mid print and then the print would twist a bit, lol.
Something to consider, I’d recommend visually watching that specific layer when it’s coming up to see if you see something happen.
I use neorg
for neovim, specifically I use:Neorg journal today
to open up a daily .Norge file that I maintain notes, todo, etc on.
If I need to leave a note for myself for the future, I create a note for that day ahead of time.
There aren’t standardized screens for smartphones, as the inside of the screens typically has a bespoke aluminum chassis they are adhered to as part of their construction.
And since every single phone model has different insides, every screen is bespoke to its model.
You have to look on ebay for your phones screen model.
If you look for ones with a couple dead pixels they are pretty affordable though.
Anecdotal warning: From my experience going tk a gandful of schools in western canada… inner city schools bias towards women dimishes due to higher risk conditions. The gender ratio shifts as you go from nicer well funded schools to inner city poorer neighborhoods.
The higher risk schools tend to have way more men teaching as well as male cops walking around, whereas the gentrified safer schools tend to be women dominated.
It still leand towards women, but the lean evens out a lot more as risk/danger goes up, as well as pay.
You also see more male teachers if you go way up to far northern schools that have much harsher conditions, where governments trade to provide monetary incentives in return for roughing it up on way more secluded places.
So, nope, from what I’ve seen the pattern holds just as much in teaching.
Men work more overtime, take on more risks, and are more willing to put themselves in danger.
Men get paid more, because they are willing to pay the extra pound of flesh it demands, because they have a bit more flesh to offer. Men have higher average stamina, physical strength, and physical resilience.
I won’t necessarily say that’s a good thing, but it’s a fact. There’s a reason all the dangerous jobs are male dominated, but simultaneously men die on the job or get severely maimed substantially more.
Interestingly enough if you look at a woman dominated industry that is extremely dangerous abd demands a pound of flesh (like prostitution) suddenly the gender gap flips heavily the other way.
As I always say, you don’t see people talking about gender disparity of garbage truck drivers and other areas of the sanitation industry, even though there’s a lot of disparity over there.
Why aren’t people complaining about the lack of women in the sanitation industry? Weird, huh?
The two acts should be distinct for sure.
You should be also able to delete all history without deleting account.
Basically should be 2 distinct buttons/actions entirely.
The fact you bring up scraping at all indicates you have no idea what this is about.
Data privacy and protection isn’t about that.
“Some third party could just…” is indeed trying to whataboutism it, it’s completely irrelevant.
Other instance owners are completely irrelevant.
You’ll need to wrap your head around the fact that legally lemmy has to support the takedown request per instance, not federation wide.
If I truly wanted my data gone I’d have to make the request to each individual server. That’s fine.
Data privacy and protection compliance means that I can request specifically server A take down my data, and still be fine with server B retaining a copy.
If I wanted both to drop the data, I’d have to request it from both individually.
Scrapers aren’t involved here.
The protection isn’t about “oh no people on the internet can see my posts”
It’s more about “oh man it came to light Server B’s owner is selling people’s data and I don’t want my data included in that”
This is a legal requirement, id recommend lemmy instance owners check in with their local lawyers about this, because a lack of compliance could get individual instance owners in hot water, and if multiple large instance owners realize this, it should put more pressure on the debs to fix that shit.
ITT: people too focused on Data Privacy with respect to other posters/internet denizens.
In reality the much bigger concern typically is the literal owner of the servers
If 1 server owner announces they are now selling off all their copies of raw lemmy data to an AI company to train on, legally by EU data privacy laws users very much would have a leg to stand on to demand their data be deleted and if the server owner doesn’t comply, they could be in very hot water.
This doesn’t have to be a federated problem.
You can request Server A delete your records while being cool with Server B keeping them, because Server A is selling your data and B isn’t.
This delete/request action doesn’t have to propagate, it can be “per server”
if you don’t know the URL, you can’t find it
The owner of the server sure can.
there is no way to control what we post to instances that aren’t our home one
This doesn’t give the home instance a get out of jail free card for also failing to comply.
This is pure whataboutism.
I hate finding swiss cheese threads on social media
See the thing us, EU data privacy and protection laws don’t really give a shit though
You feeling unhappy that chunks of a thread are missing due to someone requesting a data privacy wipe isn’t, you know, a factor that matters
I’m sure you really wanted to know what so-and-so said, but the lack of their posts existing means they didnt want you to know what they said
And, you know… they have the right to do that.
I use Hugo, it’s not super complicated.
You basically just define templates in pseudo html for common content (header, nav panel, footer, etc), and then you write your articles in markdown and Hugo combines the two and outputs actual html files.
You also have a content folder for js, css, and images which get output as is.
That’s about all there is to it, it’s a pretty minimalist static site generator.
Hosting wise you can just put it on github pages for free.