rem26_art

I personally don’t do a lot of Blender work outside of a super basic render with like one or two light sources and never really used it much when i still had an Nvidia card so I can’t really speak to it, unfortunately. I’ve never really experienced any crashes or issues or anything, outside of a regression in one of the versions of rocm-hip that was eventually patched.

I’d avoid a 13th or 14th gen Intel processor right now because they’ve had a lot of problems with their manufacturing process. Otherwise, there’s not really much difference between AMD and Intel in terms of like, OS compatibility or anything.

I’ve done some basic work with Davinci Resolve on linux and I haven’t really had any issues with my Radeon 7800XT. I can’t really speak for using the proprietary drivers for AMD, but with the open source drivers, as long as you install rocm-opencl through your package manager, Davinci Resolve should be fine. Overall, I’d recommend an AMD GPU. Edit: You mentioned blender in a comment. For AMD’s open source drivers you’d need to install rocm-hip for Cycles to work

Edit 2: I hadn’t tried blender in a bit and I realized apparently at least on Fedora 40, you also need rocm-hip-devel at least as of 09/24/24 for supported AMD GPUs to show up in Blender. Idk how that would translate to other distros

PC Part Picker is good cuz when you start a new build, you start with the CPU and then it’ll only show you parts compatible with that CPU. As someone else mentioned tho, its not perfect and you still may want to check clearances between parts, like that your CPU cooler isnt too tall for your case, or that your Power Supply isnt too long (been there, lmao)

From my own personal experience with buying brand new RAM and it being bad a few times, I’d probably run memtest86+ for a few hours once the computer is together to make sure that the RAM actually works. You can download the linux ISO w/ GRUB option and make a bootable flash drive out of that and let it run. Afterwards, I usually install my OS. Might save you a few headaches down the road if you get into your new OS and things behave strangely, but its up to you.

Other than that, the setup shouldn’t be too hard.

If anything, I havent really touched those files in a while, so I probably won’t need anything from them. I think I got most of the files I regularly used converted to something Kirta can read before I switched. Thanks!

At this point, the only thing keeping me back is I have a bunch of files made in Clip Studio Paint that I can’t open in linux, but I think I might be able to run CSP in a VM, if needs be. Not really anything gaming related.

Now just to find time to do it lol

Maybe its finally time to get rid of my dual boot. I haven’t used the windows side in like half a year…

I’ve got Btrfs on my desktop for the OS drive cuz that was what Fedora recommended when I was installing it. It took a bit of effort to get snapshots working properly, but other than that, I’ve had no issues with it at all over the past year. I’ve got an exFAT drive and an NTFS drive in there that are kind of leftovers from using Windows. I’ve been thinking about reformatting the exFAT drive to ext4 or something, since all it really does is store games, and having the ability to symlink to it would be nice.

I’ve got a TrueNAS machine as well and that uses ZFS for pretty much everything.

Just another thing to consider with exFAT is that it doesn’t support having symlinks written on it. (for example, if your exFAT drive is located at /mnt/exfat, doing ln -s ~/Documents/cool-document.txt /mnt/exfat/ will fail) Idk if that’s a problem for your use case, but just so you’re aware.

I do have a drive that is formatted with exFAT that I made with the intention of having it be readable by both Linux and Windows, but I ended up not really using windows ever lmao. It should be fine if you’re just using it to store media

Man i was literally looking into laser cutters like 2 days ago and saw that Lightburn supported Linux. Guess that was short lived.

Powertool manufacturers HATE this one simple trick.

lmao that thing looks wild

I’ve got a 7800XT now and I moved from a 1070 and I’ve been happy with it overall. I’m on Fedora and I bought the 7800 kinda close to launch, so I went through some issues that seem to have been solved by now. Nothing that really made me go “gee I wish I hadn’t switched”.

I don’t do anything related to streaming, or machine learning, so I can’t really speak to it’s ability with those, but gaming has been stable, and, aside from a now solved problem with rocm, it works fine with Blender cycles (at least on Fedora 40). Davinci Resolve has worked fine too. On launch, there wasn’t VAAPI support for AV1, but that works just fine for me now. (VAAPI is the open source interface for GPU video acceleration).

Currently, I’d say the experience is perfectly fine.

true true. If the general business pressures are not conducive to proper software release practices, no amount of programming skill can help them.

they seem extremely competent at writing bad software

This is anecdotal to me, but I remember going to the mall a whole lot as a kid cuz my mom liked shopping at the stores there. Nowadays, she still shops at the same stores, but usually through their own websites. For me, when I learned how to drive and could go to the mall myself, it was probably only to go to a place like Gamestop, since the one in the mall was the closest to me. Again, online shopping, and especially being able to download games through like, Xbox Live, the eShop (and Steam, but I wasn’t really into PC gaming until much more recently) was much more convenient than having to drive 20-30 minutes to the mall.

EDIT: Another thing I remembered is that a Target opened up closer to where I lived, so it just became more convenient to shop there for stuff like cheap clothes vs brand name places like H&M. They also sold stuff you couldn’t buy at the mall like groceries, so it was more enticing, i guess.

Recently I went back to the mall I grew up around and it was a lot more empty. One of the really big stores that was there when I was a kid was Sears and they’re gone now, and that mall had a TON of space dedicated to Sears. No one has come to lease that space. The mall has a sprawling parking lot that’s mostly empty now.

I remember as a kid there were always like, crazy extravagant displays at the mall around the Holiday Season, and things like raffles where you could win a new car or something, but I don’t think any of that has happened there in recent years to nearly the same scale.

I wouldn’t say this mall is completely dead yet (I visited a different mall that had like, maybe 5 stores open and a lot of converted office space in it on a Saturday afternoon and that was eerie and dead while still being open to the public), but I think its on its way out.

Maybe not be exactly what you’re looking for, but Logseq has a daily note-taking function. When you open it for the first time of the day, it shows you a blank journal with the current date as the header and you can put whatever you want in it. It has a search function that can search through all the notes you’ve made for specific text. It saves each day as a separate markdown file and you can sync these to your phone or other devices with Syncthing, a cloud service like Google Drive, or with git if you host something like Forgejo.

The only thing about Logseq is that it doesn’t use the standard syntax for Markdown checkboxes. Instead, it has it’s own Todo syntax, which is perfectly human readable without Logseq, but loses out of some convenience if you were to migrate to something else.

The last thing I want is my router sharing information with other parties.

It seems like the phone is applying wayy too much of some kind of sharpening filter. Are you zooming in very far? Cuz it may be trying to compensate for digital zoom by sharpening the image afterwards. If you’ve got a Pro mode setting on the camera app, maybe try using that instead and get closer to your subject, if possible. Pro mode should hopefully stop the app from applying any touch-ups to the image it thinks it needs.

the interns

Tangentially related, but I remember being in college when Tesla was like starting to take off. Like the Model S had just come out. I went to one of the Tesla internship presentations on campus and listened to some of the people who had the internship the previous year and they talked about how they were pulling like, 60+ hour weeks and that they had like, a shuttle that ran all throughout the night to take them from the workplace to the housing. Some talked about going back home at like 3AM, and then showing up for work again at 8AM. It really sounded kind of like it would be a very stressful experience and I didn’t even want to apply after listening to it. I guess they were paid well, but

Sounds like things have only gotten way more chaotic since then

Yeah im in the US. I use Tmobile and it works fine for me, 5G and all. Looking at the bands that the POCO F5 supported, it seemed like only Tmoblie uses one of the radio frequencies that the F5 uses for 5G. That probably means that I wont have 5G everywhere in the country, but I lucked out and its good for where I live.

With MIUI, i did not have the option of Wifi calling with Tmobile, for some reason, but on Paranoid Android it works just fine.

IIRC the F5 had more bands that worked with Tmobile and AT&T for LTE

Edit: This was when I bought it. Carrier band support may have changed since Nov 2023

I got a Xiaomi POCO F5 recently that might fit all your Must criteria (idk about size), but another Xiaomi may work. Just if you’re located somewhere that doesn’t use the Type C Socket, you may need an adapter or a different 67W charger

Xiaomi has a bootloader unlock process, though it is a bit involved. You’ve gotta put your SIM in the new phone, create a Xiaomi then you’ve gotta run their bootloader unlock software, which needs a Windows Computer, idk if it runs in a VM, if thats an issue for you. Then you’ve gotta keep your SIM in the phone and have it on for a full 7 days and then run the bootloader unlock software again, which will wipe your phone, but now the bootloader is unlocked

You do have to use MIUI for a week before you can wipe it and try something else, but once you go through it its fine. I’ve been using Paranoid Android on mine with no issues.

This should apply to any recent Xiaomi phone. Just something for your consideration